保价运输设备投资项目管理办法(试行)
铁道部
保价运输设备投资项目管理办法(试行)
1992年11月21日,铁道部
第一章 总 则
第1条 根据部《行包、货物保价运输财务收支管理暂行办法》的规定,为加强对保价运输收入资金用于保价运输设备投资项目的管理,特制定本办法。
第二章 投资范围
第2条 保价运输设备投资主要用于保障行包、货物运输安全,改善服务条件及开展保价运输业务需用的设施、装备等。即防火、防爆、防盗、防湿、防腐、防破坏的安全设施,改善和加强安全管理的报警、监控、检测、计量、通讯设备、交通工具、搬运设备,以及仓库、雨棚、站台、货位硬面、营业服务设施、保价业务用房屋、事故勘察处理器材、保价宣传器材等设施和装备。各铁路局要严格按规定控制非生产性项目和国家控购商品,不得擅自扩大投资范围,挪用、挤占资金。
第三章 管理权限
第3条 铁道部安排部留保价收入部分的投资项目(以下简称“铁道部安排项目”),列为铁道部更新改造计划铁路局管理项目。铁路局安排部拨周转金部分的项目。
第4条 铁道部安排项目主要解决涉及全路性的问题。
第5条 各局要严格按铁道部安排的项目计划执行,不得自行变更。如需变动应报部审批。
各局转发铁道部安排项目计划需抄报铁道部计划司、保价运输办公室核备。
第6条 铁道部安排项目计划的执行情况,各局于每年七月、十二月末前,列表报铁道部保价运输办公室。
各铁路局(包括分局)周转金部分安排项目计划执行的主要情况(项目数、投资额、规模及主要内容)于当年十二月报铁道部保价运输办公室。
第四章 近远期规划
第7条 铁路局客、货运处应根据设备现状及保价费收入情况,按铁道部安排项目、铁路局安排项目,分别做出近、远期规划。远期规划为五年,近期规划为三年。
第8条 近、远期规划应根据部、局有关客货运输的发展战略、生产布局、投资结构、技术政策、经济政策统筹考虑。要协调各项资金的投向,各有重点,有所区别。要明确各个时期的建设目标,要解决什么问题,要达到什么水平。编制近、远期规划应注重采用新技术、新设备,不断提高行包、货物运输安全管理水平。
规划应有具体项目表和文字说明。具体项目表应包括项目名称、车站名、车站等级、建设规模及内容、投资效益、总投资额、建设年度等。文字说明应包括现有设备状况,年度发、到、中转办理量,最高月的日均办理量、前5~10年递增率等。采用新设备、新技术时,应说明相关技术、设备现状,包括台数、型号、已使用年限等内容。
近、远期规划还应说明有无电气化、复线改造等情况。
第9条 近、远期规划由各铁路局客、货运处提出,计划处归口,单独报部,一式四份,铁道部计划司、保价运输办公室各两份。由部核准后下达。批准的规划应做为编制年度计划的主要依据,并可提前做好前期工作,以便分别列入年度计划。
第五章 建设项目的前期工作
第10条 各铁路局要以近、远期规划为依据,做好建设项目的可行性研究和评估论证。
第11条 铁道部原则上不安排单项总额不足30万元的项目。单项总额超过120万元的项目需报项目建议书,30~120万元的项目直接提报。
直接提报的项目应附下列内容:
(1)建设根据及理由;
(2)建设规模、工作内容;
(3)投资估算;
(4)经济效益;
(5)平面位置示意图。
第12条 对保证安全的新技术、新设备项目,如监控、防火、防爆系统等,应在提报年度建议计划的同时,提出2~3个设计方案,经部保价运输办公室审核后下达计划。
第13条 铁路局安排的工程项目单项总额在80万元以上的和购置项目单项总额在25万元以上的,需报铁道部保价运输办公室备案。
第14条 项目建议书
凡需向部提报项目建议书的项目,应在每年六月末提报下一年度项目建议书,一式三份,报部保价办公室,审核后批复。
项目建议书的内容以文字叙述为主,并包括以下内容:
(1)建设项目的必要性;
(2)建设规模、工程内容;
(3)建设条件;
(4)投资估算以及部、局投资分摊比例;
(5)建设进度安排意见;
(6)项目完成后的经济效益。
第15条 每年九月末以局文提报下一年度铁道部安排项目的年度计划建议,一式三份,报部保价运输办公室。
第16条 各铁路局要加强对保价运输设备投资项目的管理,监督工程进度,保证施工质量,工程项目一律实行限额设计,投资包干。工程竣工后,经使用单位和有关部门验收合格,交付使用。
第六章 附 则
第17条 本办法于一九九三年一月一日起试行。
第18条 本办法由铁道部保价运输办公室负责解释。凡前发与本办法相抵触的规定,均以本办法为准。
研制无线电发射设备的管理规定(附英文)
国家无线电管理委员会
研制无线电发射设备的管理规定(附英文)
1995年3月24日,国家无线电管理委员会
第一条 为加强对无线电发射设备的研制管理,根据《中华人民共和国无线电管理条例》制定本规定。
第二条 凡在中华人民共和国境内研制(含试制,下同)无线电发射设备的单位必须遵守本规定。
第三条 在本规定中,无线电发射设备定义为:无线电通信、导航、定位、测向、雷达、遥控、遥测、广播、电视等各种发射无线电波的设备,不包含可辐射电磁波的工业、科研、医疗设备、电气化运输系统、高压电力线及其他电器装置等。
第四条 研制无线电发射设备必须符合国家有关技术标准和无线电管理有关规定。
第五条 研制无线电发射设备必须按以下程序办理核准手续:
(一)研制单位必须提交研制申请表(见附件1)、研制单位主管部门批准文件、可行性报告及技术资料等相关文件。中央国家机关及其在京直属单位向国家无线电管理委员会办公室(以下简称国家无委办公室)领取和提交申请表,其他单位向所在省、自治区、直辖市无线电管理委员会办公室(以下简称省、区、市无委办公室)领取和提交申请表,经省、区、市无委办公室提出意见后转报国家无委办公室。
(二)国家无委办公室对申请表和相关文件进行审查。审查合格后,由国家无委办公室核发无线电发射设备研制核准批件(见附件2),并抄送相关省、区、市无委办公室。
第六条 国家无委办公室和相关省、区、市无委办公室对批准的研制项目进行监督和检查。研制单位在规定时间内未能完成研制任务,必须向国家无委办公室提出申请办理延期手续,否则,国家无委办公室核发的研制核准批件自动失效。
第七条 研制无线电发射设备时,如需进行实效发射,必须按设置无线电台有关管理规定办理临时设台手续。
第八条 研制完成后,应由相关科技管理机构根据国家科学技术委员会发布的科学技术成果鉴定办法或其它有关规定组织技术鉴定,该研制设备的技术指标应符合国家无委办公室核发的无线电发射设备研制核准批件的要求,其鉴定的文件、资料应报国家无委办公室和所在省、区、市无委办公室备案。
第九条 研制专供军事系统使用的无线电发射设备,按国家和中国人民解放军无线电管理委员会的有关规定办理。
第十条 违反本规定研制无线电发射设备,按国家无线电管理有关规定给予处罚。
第十一条 本规定由国家无线电管理委员会办公室负责解释。
第十二条 本规定自发布之日起施行。
附件1:研制无线电发射设备申请表
------------------------------------------------------------------------------------
| | 法人代表 | |
|申请单位: | (签字) | |
| |------------|------------------|
| | 联 系 人| |
| |------------|------------------|
| (盖章) | 电 话 | |
|----------------------------------------------|------------|------------------|
| 通信地址 | | 邮政编码 | |
|--------------------------------------------------------------------------------|
| 研制项目负责人 | | 职称 | | 职务 | |
|--------------------------------------------------------------------------------|
| 上级主管单位名称 | |
|--------------------------------------------------------------------------------|
| 与上级主管单位关系 | 1直属 2代管 3联营 4间接 5无主管 |
|--------------------------------------------------------------------------------|
| 设备名称 | |
|------------|------------------------------------------------------------------|
| | |
| | |
| | |
| 主要功能 | |
| | |
| | |
| | |
|------------|------------------------------------------------------------------|
| 调制方式 | |
|------------|------------------------------------------------------------------|
| 技术参数 | 频率范围 | 占用带宽 | 发射功率 |
|------------|--------------------|--------------------|----------------------|
| 指 标 值 | | | |
|--------------------------------------------------------------------------------|
| 年 月 日 |
------------------------------------------------------------------------------------
附件2:国家无线电管理委员会办公室无线电发射设备研制核准批件
序号:××--××××
----------------------------------------------------------------------
××××:
经审查,同意你单位研制下列无线电发射设备。
有效期:××××年××月××日止
经办人:×××
××××年××月××日
--------------------------------------------------------------------
| 设备名称 | |
|------------|--------------------------------------------------|
| 设备型号 | |
|------------|--------------------------------------------------|
| | |
| | |
| 设备功能 | |
| | |
| | |
|------------|--------------------------------------------------|
| 调制方式 | |
|----------------------------------------------------------------|
| 主要技术参数及其指标值 |
|----------------------------------------------------------------|
| 频率范围 | |
|------------|--------------------------------------------------|
| 频率容限 | | 发射功率 | |
|------------|--------------|----------------|----------------|
| 占用带宽 | | 杂散发射限值 | |
--------------------------------------------------------------------
Provisions on the Development of Radio Transmission Equipment
Article 1
In order to strengthen the management on the development of radio
transmission equipment, provisions are established in line with "the Radio
Regulations of the People's Republic of China."
Article 2
Any unit which engages in the development (hereinafter including trial
production) of radio transmission equipment must follow the provisions.
Article 3
In these provisions, a radio transmission equipment is defined as any
equipment which radiates radio wave for communication, navigation,
location, determination, direction finding, remote control, telemetry,
broadcasting, TV transmission and radar purposes. It does not include any
equipment which transmits electromagnetic wave for the industrial,
scientific and medical use, electrical transportation system, high voltage
power carrier and other electrical devices.
Article 4
The development and manufacture of radio transmission equipment must
comply with the technical standards of the state and the radio regulations
concerned.
Article 5
Approval should be obtained according to the following procedure before
radio transmission equipment is developed.
a). The unit concerned should submit related documents such as the
application form (see annex 1), approval document from the authority
concerned, feasibility report and technical materials. central government
institutions and their affiliated units in Beijing receive and submit
application forms from and to the Office of State Radio Regulatory
Commission (hereinafter referred to as SRRC Office). Other units get and
submit application forms from and to the Office of Radio Regulatory
Commission in various provinces, autonomous regions and
municipalities (hereinafter referred to as Local RRC Office). These
applications will be transferred to the SRRC Office with the opinions of the
Local RRC Office of various provinces, autonomous regions and
municipalities.
b). The application form and other related documents will be reviewed
by the SRRC Office. For those units which are qualified, SRRC Office will
issue the approval (see Annex 2) with copies sent to the Local RRC Office
concerned.
Article 6
SRRC Office and Local RRC Office concerned conduct monitoring and
supervision over the approved projects. If any unit fails to complete the
development within the specified period, it must apply for the extension of
the approval from the SRRC Office. Otherwise, the approval becomes
invalid in due time.
Article 7
During the development of the radio transmission equipment, the unit must
go through the procedure necessary for a temporary station in accordance
with the provisions in regard of setting up radio stations when actual
transmission is required.
Article 8
Upon the completion of development, appraisal should be organized by the
scientific and technological administrative organs according to the Appraisal
Method on the Scientific and Technological Achievements issued by the
State Commission of Science and Technology. The technical objectives
should comply with the requirement put forward by SRRC Office on radio
transmission equipment. Appraisal document and material should be put on
the file of SRRC Office and Local RRC Office concerned.
Article 9
The development of the radio transmission equipment for military use
should follow the provisions of both SRRC Office and the Radio Regulatory
Commission of the People's Liberation Army of China.
Article 10
Any unit which develops radio transmission equipment violating these
provisions will be punished according to the state radio regulation
provisions.
Article 11
SRRC Office is responsible for the interpretation of these provisions.
Article 12
These provisions start to be implemented form the day they are issued.
Annex 1. Application Form for Development of Radio transmission Equipment
----------------------------------------------------------------------------------
|Applicant |Legal Person | |
| |(Signature) | |
| |----------------|------------|
| | | |
| |Contact | |
| |----------------|------------|
| |Telephone | |
|----------------------------------------------|----------------|------------|
| | | | |
|Postal Address| |Postal Code | |
|------------------------------------------------------------------------------|
|Head of | | | | | |
|Project | |Title | |Position| |
|--------------|--------------------------------------------------------------|
|Name of | |
|Administration| |
|------------------------------------------------------------------------------|
| |1. affiliation 2. agent |
|Relation with the Administration |3. joint operation 4. indirect |
| |5. no administration |
|------------------------------------------------------------------------------|
|Name of | |
|Equipment | |
|--------------------|--------------------------------------------------------|
| | |
|Main Functions | |
| | |
|--------------------|--------------------------------------------------------|
|Modulation Mode | |
|--------------------|--------------------------------------------------------|
|Technical Parameters|Frequency Range |Occupied bandwidth|Transmitting power|
|--------------------|----------------|------------------|------------------|
|Objective Value | | | |
|------------------------------------------------------------------------------|
| Date: |
----------------------------------------------------------------------------------
Annex 2. Office of State Radio Regulatory Commission Approval Certificate on Development of Radio Transmission Equipment
Number: ××××
--------------------------------------------------------------------------
××××:
This is to approve your unit to develop the following radio transmission
equipment based on our review.
Valid period:
Handled by: Authority's seal
Date:
--------------------------------------------------------------------------
|Name of Equipment | |
|------------------|--------------------------------------------------|
|Type of Equipment | |
|------------------|--------------------------------------------------|
| | |
| | |
| Main Functions | |
| | |
| | |
|------------------|--------------------------------------------------|
| Modulation Mode | |
|----------------------------------------------------------------------|
| Main Technical Parameters |
|----------------------------------------------------------------------|
| Frequency Range | |
|------------------|--------------------------------------------------|
| Frequency | |Transmitting Power| |
| Tolerence | | | |
|------------------|--------------|------------------|--------------|
| Occupied | |Spurious | |
| Bandwidth | |Emission Limit | |
--------------------------------------------------------------------------